Parking Brake Cable Guide Replacement

Parking Brake Cable Guide Replacement

Removal Procedure

1. Release the parking brake.
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).




3. Remove the park brake cable guide bolt.
4. Remove the park brake cable guide (2).
5. Remove the park brake guide from the park brake cable.

Installation Procedure




1. Install the park brake cable guide to the park brake cable.
2. Install the park brake cable guide (2).

Caution: Refer to Fastener Caution (Fastener Caution).

3. Install the park brake cable guide bolt.

Tighten the bolt to 12 Nm (106 lb in).

4. Remove the safety stands.
5. Lower the vehicle.