Trim Panel: Service and Repair
INTERIOR TRIM AND HEADLINERInterior Trim And Headliner:
REMOVAL AND INSTALLATION
1. Remove the front door scuff trim and rear door scuff trim.
2. Remove the center pillar lower trim.
3. Remove front seat belt upper anchor and center pillar upper trim.
Tightening torque
Front seat belt upper anchor mounting bolts:
35 - 45 Nm (350 - 450 kg.cm, 25.4 - 32.6 lb.ft)
4. Remove the cowl side trim.
5. Remove the front pillar trim.
6. To remove the rear package tray trim, first remove the following parts:
1. Rear seat cushion
2. Rear seat back
3. Luggage partition trim
4. High mounting stop lamp
7. Remove the rear pillar trim.
8. To remove the headliner, first remove the following parts:
1. Front and rear roof assist handle
2. Map lamp, room lamp, overhead console lamp
3. Sun visor and sun visor retainer.
9. Installation is the reverse of removal.