Performance Brakes

Brake Disc - Vehicles With: High Performance Brakes, VIN Range: G45704->G99999 (70.10.10)

Removal
1. Remove the brake pads.

2. NOTE:
Left-hand shown, right-hand similar.

Remove the brake caliper anchor plate.
Remove and discard the brake caliper anchor plate retaining bolts.





3. NOTE:
If the same brake disc is to be installed, the tip of a hub must be marked with a corresponding part of the brake disc for alignment.

NOTE:
Left-hand shown, right-hand similar.

Remove the brake disc.
Remove and discard the brake disc retaining clips.





Installation

1. CAUTION: Brake discs must always be replaced in axle sets.

NOTE:
Left-hand shown, right-hand similar.

To install, reverse the removal procedure.
Tighten to 115 Nm.