Fuel Injector: Service and Repair

Fuel Injector

Removal
1 Remove the cover and disconnect the battery ground cable.
2 Remove the fuel injection supply manifold. For additional information, refer to Fuel Injection Supply Manifold Service and Repair




3 Remove the fuel injector.
- Remove the clip.
- Discard the O-ring seal.

Installation
1 Install the fuel injector.
- Clean the component mating faces.
- Install a new O-ring seal.
- Secure with the clip.
2 Install the fuel injection supply manifold. For additional information, refer to Fuel Injection Supply Manifold Service and Repair
3 Connect the battery ground cable and install the cover.