Fender

Fender

Removal and Installation

1. Remove the front bumper cover. For additional information, refer to Bumpers Service and Repair.

2. Remove the front bumper cover bracket.
- Remove the front bumper cover bracket screw.

- Remove the front bumper cover bracket bolt.

3. Remove the front fender front rail bolts.
- To install, tighten to 9 Nm (80 lb-in).

4. Remove the fender splash shield. For additional information, refer to Fender Splash Shield Fender Splash Shield.

5. Remove the 2 front fender lower bolts.
- To install, tighten to 9 Nm (80 lb-in).

6. Remove the 3 front fender upper bolts.
- To install, tighten to 9 Nm (80 lb-in).

7. Remove the front fender rear inner bolt.
- To install, tighten to 9 Nm (80 lb-in).

8. Remove the 2 front fender upper rear bolts.
- To install, tighten to 9 Nm (80 lb-in).

9. To install, reverse the removal procedure.