Transducer - Primary

Removal

NOTE: The stability assist module needs to be recalibrated whenever a component is disconnected, moved, or a new component is installed. For additional information regarding the recalibration procedure and when the recalibration procedure should be carried out.





1. Position the vapor management valve aside.
1 Remove the vapor management valve bracket bolts.
2 Position the vapor management valve aside.





2. Disconnect the main pressure transducer electrical connector.





3. Remove the main pressure transducer.

Installation

NOTE: The stability assist module needs to be recalibrated whenever a component is disconnected, moved, or a new component is installed. For additional information regarding the recalibration procedure and when the recalibration procedure should be carried out.

1. To install, reverse the removal procedure.