Timing Component Alignment Marks: Locations

The timing mark on the RH camshaft sprocket is approximately at the 11 o'clock position and the timing mark on the LH camshaft sprocket is approximately at the 12 o'clock position.

Marked Links:

The copper link on one end and one link on the other end, are used as timing marks.

- The RH camshaft sprocket timing mark is approximately at the 11 o'clock position.
- The LH camshaft sprocket timing mark is approximately at the 12 o'clock position.

LH (inner) timing chain on the crankshaft sprocket, aligning the copper (marked) link with the timing mark on the sprocket.

LH timing chain on the camshaft sprocket, aligning the copper (marked) link with the timing marks on the sprocket.

RH (outer) timing chain on the crankshaft sprocket, aligning the copper (marked) link with the timing mark on the sprocket.

RH timing chain on the camshaft sprocket, aligning the copper (marked) link with the timing marks on the sprocket.

Aligning Chain Marks:

Make sure that the copper (marked) chain links are lined up with the dots on the crankshaft sprockets and the camshaft sprocket.