Initial Inspection and Diagnostic Overview

Disassembly / Assembly




1. Disassemble the magnetic clutch as shown in the figure.
2. Assemble the magnetic clutch in the reverse order of removal.

Stator Inspection




1. Verify continuity between the stator terminals.

Note: Set the ohmmeter to x1 ,OOO ohm range.

2. If there is no continuity, replace the stator.

Clearance Adjustment







- Adjust the clearance between the pressure plate and the rotor pulley by selecting and installing the proper shim(s).

Clearance: O.4 - O.5 mm (O.O16 - O.O20 in)