Variable Induction Control Solenoid: Testing and Inspection

INSPECTION

VRIS Solenoid Valve #1 & #2 Inspection (Test 1):

1. Disconnect the solenoid valve.

VRIS Solenoid Valve #1 & #2 Inspection (Test 1) Specifications:

2. Verify that air flow between each port as shown.

VRIS Solenoid Valve #1 & #2 Inspection (Test 2):

3. Apply battery positive voltage and a ground to the terminals of the solenoid valve.

VRIS Solenoid Valve #1 & #2 Inspection (Test 2) Specifications:

4. Verify that air flow between each port as shown.