Front

FRONT BRAKE (DISC) REMOVAL/INSTALLATION





1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.
3. After installation, depress the pedal a few times. Then rotate the wheel using hand, and verify that the brakes do not drag.

Disc Plate Removal Note:





1. Mark the wheel hub bolt and disc plate before removal for reference during installation.

Caliper Installation Note:





1. Push the piston fully inward using the SST.
2. Install the caliper.

Disc Plate Installation Note:
1. Remove any rust or grime on the contact face of the disc plate and wheel hub.
2. Install the disc plate and align the marks made before removal.