Blower Unit Removal and Installation

BLOWER UNIT REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.
2. Remove the cooling unit. (See COOLING UNIT REMOVAL/INSTALLATION.)




3. Remove in the order indicated below.
1. Connector
2. Nut
3. Blower unit

4. Install in the reverse order of removal.

BLOWER UNIT DISASSEMBLY/ASSEMBLY




1. Disassemble in the order indicated below.
1. Blower harness
2. Blower motor
3. Air intake actuator
4. Air intake rod
5. Air intake link
6. Resistor
7. Polyurethane protector
8. Case
9. Air guider
10. Air intake door

2. Assemble in the reverse order of disassembly.