Shift Solenoid: Service and Repair

SOLENOID BODY REMOVAL/INSTALLATION
1. Remove the control valve body.





2. Remove the solenoid body component.





3. Remove the solenoid gasket from the accumulator body. Discard the solenoid gasket.
4. Install the solenoid body and a new gasket on the accumulator body with the bolts.





Note: Match the solenoid body gasket to the passages.





5. Tighten the bolts.
Tightening torque 10 Nm (1.1 kgf-cm, 8 ft. lbs.)
6. Install the control valve body.
7. Carry out the time lag test and line pressure test.
8. Carry out the road test.