Fuel Pressure Pulsation Damper: Testing and Inspection

PULSATION DAMPER INSPECTION

1. Complete the "BEFORE REPAIR PROCEDURE". (See BEFORE REPAIR PROCEDURE.)
2. Remove the pulsation damper. (See PULSATION DAMPER REMOVAL/INSTALLATION.)
3. Visually inspect the pulsation damper for damage and cracks Also inspect if there is no extreme rust which will cause fuel leakage.
- If any of the above-mentioned malfunction is observed, replace the pulsation damper.
4. Complete the "AFTER REPAIR PROCEDURE". (See AFTER REPAIR PROCEDURE.)