Removal and Installation

REMOVAL

WARNING: Never remove the radiator cap when the engine is hot. Serious burns could occur from high pressure coolant escaping from the radiator. Wrap a thick cloth around the cap. Slowly push down and turn it a quarter turn to allow built-up pressure to escape. Carefully remove the cap by pushing down and turning it three-quarters around.

1. Drain the engine coolant.
2. Remove the air duct with air cleaner assembly.
3. Disconnect A/T oil cooler hoses (if equipped).
^ Install a blind plug to avoid leakage of A/T oil.
4. Disconnect the radiator upper hose, lower hose, and mounting bracket.
5. Remove the radiator and cooling fan assembly.

CAUTION: Do not damage or scratch radiator core when removing.

INSTALLATION
Installation is in the reverse order of removal.
^ After installation, run the engine until it reaches full operating temperature and check for any cooling system leaks. Repair any leaks as necessary.