Active Test

ACTIVE TEST PROCEDURE





^ When conducting Active test, vehicle must be stationary.
^ When ABS warning lamp stays on, never conduct Active test.

CAUTION: If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending on control unit which carries out CAN communication.

1. Turn ignition switch OFF.
2. Connect CONSULT-II and CONSULT-II CONVERTER to the data link connector.
3. Start engine.
4. Touch "START (NISSAN BASED VHCL)" on CONSULT-II screen.





5. Touch "ABS". If "ABS" is not indicated, go to GI-38, "CONSULT-II Data Link Connector (DLC) Circuit". Electrical Diagrams





6. Touch "ACTIVE TEST".





7. Select active test item by touching screen.





8. Touch "START".
9. Carry out the active test by touching screen key.

ACTIVE TEST MODE: