Procedure F: Replace Engine (If Needed)

PROCEDURE F: REPLACE ENGINE (if needed)

1. Record all radio station presets.

2. Make sure the ignition key is in the OFF position.

3. Disconnect the negative battery cable.

4. Refer to the Service Manual for engine replacement information.

NOTE:
^ This bulletin does not contain a step-by-step engine replacement procedure. Use the Service Manual as the main source for engine replacement procedures.

^ Appendix C provides informational tips related to replacing an engine. It is recommended that you review these tips before replacing the engine.





5. Place a check mark next to each item in the After Engine Replacement Check List above.

6. Perform Final quality checks (see Appendix D).