VDC/TCS/ABS Control Unit

VDC/TCS/ABS CONTROL UNIT

Removal and Installation

REMOVAL





1. Remove dash side finisher (RH).
2. Remove VDC/TCS/ABS control unit bolts.
3. Remove VDC/TCS/ABS control unit.

INSTALLATION
Installation in the reverse order of removal.
- When installing the VDC/TCS/ABS control unit, tighten bolts to the specified torque.
VDC/TCS/ABS control unit bolts: 8.3 Nm (0.85 kg-m, 73 in-lb)

CAUTION:
When replacing VDC/TCS/ABS control unit, make sure to adjust neutral position of steering angle sensor. Refer to BRC-78, "Adjustment of Steering Angle Sensor Neutral Position". Testing and Inspection