Crankshaft Pulley

Crankshaft Pulley
Tighten crankshaft pulley bolts.
Secure crankshaft pulley with a pulley holder to tighten the bolt.
Perform angle tightening using Tool with the following procedure:
Tool number KV10112100 (BT-8653-A)
Apply new engine oil to threads and seat surfaces of bolts.
Tighten to initial specifications:
Crankshaft pulley bolt initial tightening 37.3 - 47.1 Nm (3.8 - 4.8 kg-m, 28 - 34 ft-lb)





Apply a paint mark on the front cover, mating with any one of six easy to recognize stamp marks on bolt flange.
Turn crankshaft pulley bolt another 60° to 66° degrees [Target: 60° degrees].
Check vertical mounting angle with movement of one stamp mark.