Front

REMOVAL PROCEDURE





1. Remove the stabilizer link nut (2) from the stabilizer link bolt (5).
2. Remove the following components:
- The stabilizer link bolt (5)
- The insulator (4)
- The spacer (3)

INSTALLATION PROCEDURE





1. Install the following components:
- The spacer (7)
- The insulator (4)
- The stabilizer link bolt (5)

NOTICE: Refer to Fastener Notice in Service Precautions.

2. Install the stabilizer link nut (4) attaching the stabilizer link to the stabilizer link bolt (5).
- Tighten the nut until the nut meets the end of the bolt threads for torque value. Tighten the nut to 17 Nm (13 ft. lbs.).