Radiator Hose Replacement - Inlet

Removal Procedure

- Tools Required
- J 37097-A Hose Clamp Remover/Installer

Caution: Refer to Battery Disconnect Caution In Service Precautions.

1. Disconnect the negative battery cable.
2. Drain the coolant.





3. Remove the inlet radiator hose clamp from the radiator.
4. Remove the inlet radiator hose from the radiator.





5. Remove the inlet radiator hose clamp from the engine.
6. Remove the inlet radiator hose from the engine.
7. Remove the air cleaner assembly.
8. Remove the injector sight shield for access to clamps.

Installation Procedure

- Tools Required
- J 37097-A Hose Clamp Remove Installer

1. Install the air cleaner assembly.
2. Install the injector sight shield.





3. Install the inlet radiator hose to the engine.
4. Install the inlet radiator hose clamp to the engine.





5. Install the inlet radiator hose to the radiator.
6. Install the inlet radiator hose clamp to the radiator.
7. Fill the cooling system.
8. Start the engine and checks for leaks.