2 Door

Description:

CAUTION: The seat belt assembly and/or bracket assembly must be replaced as a unit only. Do not substitute parts for any reason, or personal injury could result.

CAUTION: Refer to Battery Disconnect Caution in Service Precautions.

1. Disconnect the negative (-) battery cable.
2. Remove the following from the front seat:
^ One bolt
^ The washer
^ The spacer
^ The front seat belt buckle (4)
3. Disconnect the electrical connector (5) (left-side buckle).
4. Remove the following components:
^ One front seat belt lower anchor bolt
^ The washers
^ The spacer
5. Open the cover and remove the following components:
^ One front seat belt upper guide loop (I) anchor bolt
^ The washers
^ The spacer
6. Remove the lower rear quarter trim panel. Refer to Body Rear End in Body and Accessories.
7. Remove the following from the vehicle:
^ One screw
^ One front seat belt retractor bolt
^ The washers
^ The front seat belt retractor (2)