2 Door

NOTICE: Refer to Fastener Notice in Service Precautions.

1. Install the rear seat belt buckle (3) to the vehicle. Secure the buckle with one anchor bolt.
Tighten
Tighten the rear seat belt buckle anchor bolt to 45 N.m (33 lb. ft).
2. Install the spare tire cover and position the luggage compartment carpet into place. Secure the carpet with two plastic snaps.
3. Install the retractor assembly (4) to the vehicle. Secure the assembly with one mounting bolt.
Tighten
Tighten the rear seat belt retractor assembly mounting bolt to 45 N.m (33 lb. ft).
4. Install the retractor assembly plastic trim cover.
5. Install the rear speaker electrical connector (if equipped).

Description:

6. Install the rear seat belt guide loop to the vehicle. Secure the guide loop with one anchor bolt, the washers, the spacer and the plastic cover.
Tighten
Tighten the rear seat belt guide loop anchor bolt to 45 N.m (33 lb. ft).
7. Install the rear seat belt (2) to the vehicle. Secure the belt with one lower anchor bolt.
Tighten
Tighten the rear seat belt lower anchor bolt to 45 N.m (33 lb. ft).
8. Install the rear seat cushion. Refer to Seats in Body and Accessories.