Radiator Hose Replacement - Outlet

Removal Procedure





1. Drain the cooling system.
2. Disconnect the intake air temperature (IAT) sensor electrical connector.
3. Disconnect the mass airflow (MAP) sensor electrical connector.





4. Remove the air intake duct resonator.





5. Remove the outlet hose from the water outlet.
6. Raise and suitably support the vehicle. Refer to Vehicle Lifting.





7. Remove the outlet hose (2) from the radiator.

Installation Procedure





1. Install the outlet hose (2) to the radiator.
2. Lower the vehicle.





3. Install the outlet hose to the water outlet.





4. Install the air intake duct resonator.





5. Connect the IAT sensor electrical connector.
6. Connect the MAF sensor electrical connector.
7. Refill the cooling system.