| Standard Hours | Manufacturer Warranty Hours | Skill Level | Notes |
| Replace |
| Add Following Operations If Performed With Piston & Ring Jobs |
| Main Bearings, Renew | 1.3 | 0.0 | A | |
| Crankshaft, Renew | 2.0 | 0.0 | A | |
| Oil Pump, Renew | 1.0 | 0.0 | A | |
| Oil Pump Screen, Clean | 0.2 | 0.0 | A | |
| One | 2.0 | 0.0 | A | |
| Both | 3.5 | 0.0 | A | |
| Rear Main Oil Seal, Renew | 1.0 | 0.0 | A | |
| Timing Chain, Renew |
| Without Turbo | 0.8 | 0.0 | A | |
| With Turbo | 1.5 | 0.0 | A | |
| Tune-Up | 0.6 | 0.0 | A | |
| Piston Rings | 1.5 | 1.0 | A | After Pistons Are Removed. After Engine And Cylinder Heads Are Removed. |
| Connecting Rods | 0.6 | 0.2 | A | After Crankshaft Is Removed. After Engine And Cylinder Heads Are Removed. |