Engine - Valve Reconditioning Tools
84saab01SUBJECT: VALVE RECONDITIONING TOOLS, M85-
16 VALVE
09/84-712
ISSUE:
FILE IN S.I. MANUAL:
VOLUME: I
SECTION 1
PAGE: 69
The following tools are now available to replace the valve guides and cut new valve seats on the 16 Valve engine. These tools are listed below and may be purchased should you intend to do any complete cylinder head reconditioning on 16 Valve engines.
These tools are in addition to the minimum required special tools for the 16 Valve engine listed in S.I. 09/84-707. The following listed tools are not required.
Part numbers involved
83-90-494 Valve Guide Press
83-93-811 Connecting Shaft
83-93-829 Sleeve
83-93-837 Stop
83-93-845 Sleeve Nut
83-90-379 Centering Sleeve
83-93-936 Neway 270 Cutter (60~)
78-61-040 Neway 286 Cutter (45~ and 11~)
83-93-928 Neway 150-7 Guide Spindle
78-61-065 Neway T-Wrench
83-93-944 Guide Reamer
30-20-971 Molycoat 1000
Tool Description
83-90-494 - Valve Guide Press. Used to remove or replace valve guide. See also the following accompanying pieces.
83-93-811 - Connecting shaft.
83-93-829 - Sleeve.
83-93-837 - Stop.
83-93-845 - Sleeve Nut.
83-90-379 - Centering Sleeve.
83-93-936 - Valve seat cutter. Neway 270 60~.
78-61-040 - Valve seat cutter. Neway 286 45~/11~.
83-93-928 - Guide Spindle. Neway 150-7.
78-61-065 - T-Wrench.
83-93-944 - Valve Guide Reamer.
30-20-971 - Molycoat 1000. Upon re-installing a 16 Valve cylinder head, always coat the threads of the cylinder head bolts before assembly.