Crankshaft Main Bearing
Cylinder block connecting boltsTighten the 10 mm cylinder block connecting bolts on the LH side (A - D) in alphabetical order
Tighten the 10 mm cylinder block connecting bolts on the RH side (E - J) in alphabetical order
Tighten the LH side cylinder block connecting bolts (A - D) further in alphabetical order
Tighten the RH side cylinder block connecting bolts (E - J) further in alphabetical order
Tighten the LH side cylinder block connecting bolts (A - D) further in alphabetical order
(A), (C): Angle tightening
Tightening angle 90 degrees
(B), (D): Torque tightening
Tighten the RH side cylinder block connecting bolts (E - J) further in alphabetical order
Tighten the 8 mm and 6 mm cylinder block connecting bolts on the LH side (A - H) in alphabetical order
Crankshaft bearing
Bearing size (Thickness at center) mm (in)
#1, #3
Standard 1.998 - 2.015 (0.0787 - 0.0793)
0.03 (0.0012) US 2.017 - 2.020 (0.0794 - 0.0795)
0.05 (0.0020) US 2.027 - 2.030 (0.0798 - 0.0799)
0.25 (0.0098) US 2.127 - 2.130 (0.0837 - 0.0839)
#2, #4, #5
Standard 2.000 - 2.017 (0.0787 - 0.0793)
0.03 (0.0012) US 2.019 - 2.022 (0.0795 - 0.0794)
0.05 (0.0020) US 2.029 - 2.032 (0.0799 - 0.0800)
0.25 (0.0098) US 2.129 - 2.132 (0.0838 - 0.0839)