Shift Cable: Adjustments

ADJUSTMENT





1. With loosening cable end nut, shift selector lever to "N" range.
2. Also shift manual shift lever to "N" range.

NOTE: Make sure that nut and cable joint have clearance under above conditions.





3. Turn nut A by hand till it contacts manual select cable joint. Then tighten nut B with wrench.
4. After tightening nut, check for the following.
- Vehicle should not move when pushing vehicle with selector lever shifted to "P" range.
- Vehicle can not be driven in "N" range.
- Vehicle can be driven in "D", "2" and "L" ranges.
- Vehicle can be backed in "R" range.