Windshield Washer Motor: Service and Repair

Front Washer Motor:

REMOVAL

1. REMOVE COOL AIR INTAKE DUCT SEAL (for 2GR-FE)
2. REMOVE FRONT BUMPER ASSEMBLY (W/O Fog Light)
3. REMOVE FRONT BUMPER ASSEMBLY (W/ Fog Light)
4. DRAIN WASHER FLUID




a. Disconnect the washer hose from the windshield washer motor and pump assembly, and drain the washer fluid.

5. REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY




a. Disconnect the connector.
b. Remove the windshield washer motor and pump assembly.

INSTALLATION

1. INSTALL WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY




a. Install the windshield washer motor and pump assembly.
b. Connect the connector.

2. FILL UP WASHER JAR WITH WASHER FLUID




a. Connect the washer hose to the windshield washer motor and pump assembly and fill the washer jar with washer fluid.

3. INSTALL FRONT BUMPER ASSEMBLY (W/ Fog Light)
4. INSTALL FRONT BUMPER ASSEMBLY (W/O Fog Light)
5. INSTALL COOL AIR INTAKE DUCT SEAL (for 2GR-FE)