Installation (from 12/2010)

AUDIO / VISUAL: STEERING PAD SWITCH: INSTALLATION

1. INSTALL STEERING PAD SWITCH ASSEMBLY

(a) Engage the 4 pins and install the steering pad switch assembly.

(b) Engage the clamp and Install the 2 screws.

(c) Connect the connector to the spiral cable.

2. INSTALL STEERING PAD Installation (from 12/2010)

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Some systems need initialization when disconnecting the cable from the negative battery terminal.

4. PERFORM SYSTEM INITIALIZE Installation (from 12/2010)

5. INSPECT STEERING PAD Installation (from 12/2010)

6. INSPECT SRS WARNING LIGHT Installation (from 12/2010)