Window Regulator Switch (RF Door)

Lights and Switches in Front Doors and B-Pillar


Window Regulator Switch

• The Push Button Illumination (L76) is integrated in the Window Regulator Switch (in RF door) (E107), which cannot be replaced separately.

CAUTION!
• Turn off the ignition and all electrical consumers.

• Remove ignition key.

• When removing and installing components in a visible area (switches, covers, trim, etc.), mask off the areas at which a prying tool (trim removal wedge (VAS 3409), screwdriver) will be positioned, using commercially available adhesive tape.

Removing

- Remove the upper part of the handle shell from the pull handle.

- Disconnect electrical connection - arrow -.





- Release the retaining tabs - arrows - and remove the window regulator switch (in RF door) from the installation frame.





Installing

Install in reverse order of removal.