Access/Start Authorization Control Module Output Diagnostic Test Mode

Access/Start Authorization

Access/Start Authorization Control Module Output Diagnostic Test Mode

The following components (depending on equipment) can be checked via output Diagnostic Test Mode (DTM) of Access/Start Authorization Control Module (J518):

• Electronic steering column lock

• Activation of voltage supply relay, terminal 15

• Activation of voltage supply relay, terminal 15SV

• Activation of voltage supply relay, terminal 75X

• Ignition key removal lock

• Ignition/Starter Switch

• Access/Start Authorization antenna

- Connect Vehicle Diagnosis, Testing and Information System (VAS 5051A).

- In Vehicle Diagnostic, Testing and Information System (VAS 5051A), select operating mode "Guided Fault Finding ".

- Using the "Go To" button, select "Functions/Component selection" and the following menu options in sequence:

• Body

• Body repair procedures

• 01 - On Board Diagnostic (OBD) capable systems

• Access/Start Authorization

• Functions

• Access/Start Authorization Control Module -J518-, output Diagnostic Test Mode (DTM)