Fiber-Optic Cable

Fiber-Optic Cable

For Volkswagen, no repairs are performed on fiber optic cables. For a repair, the entire fiber optic cable is replaced. Observe the following safety precautions for this:

• Fiber optic cables must not be sharply bent, bending radius must be no less than 25 mm.

• Fiber optic cables must not be routed over sharp edges.

• End pieces (lenses) must not be soiled or grasped with bare fingers.

• Fiber optic cables may not be heated.

• It is not permitted to twist together two fiber optic cables or one fiber optic cable with a copper wire.