Wheel Alignment

Wheel Alignment

Special tools, testers and auxiliary items required

• Wheel Alignment Computer (V.A.G 1813) or VW/Audi approved wheel alignment devices

• Brake Pedal Actuator (V.A.G 1869/2)

• Insert Tool 18 mm (T10179)

• Shock Absorber Set (T10001)

The vehicle may only be measured with a VW/Audi approved wheel alignment machine!

Wheel alignment checks must always include both the front and rear axles.

Otherwise centering of toothed shaft cannot be guaranteed!

- Perform alignment using the alignment computer.

All information needed for the alignment can be found in the alignment computer.

=> VW Service Net; Systems; Vehicle alignment software; Vehicle alignment; Beissbarth

=> VW Service Net; Systems; Vehicle alignment software; Vehicle alignment; Hunter

=> VW Service Net; Systems; Vehicle alignment software; Vehicle alignment; Corghi

=> VW Service Net; Systems; Vehicle alignment software; Vehicle alignment; John Bean

• Wheels should not be aligned until the vehicle has been driven 1,000 to 2,000 km, since it takes this long for the coil springs to settle.

• The individual specifications should be followed as exactly as possible when making adjustments.

When Vehicle Alignment is Necessary

• Vehicle shows handling problems.

• There is an accident damage and components were replaced.

• Axle components have been removed or replaced.

• Tire wear patterns are uneven.

Components replaced





1) Requirement: Subframe and brackets were secured before removal. Refer to => [ Subframe and Brackets, Securing ] Procedures.

Components removed and installed





1) Requirement: Subframe and brackets were secured before removal. Refer to => [ Subframe and Brackets, Securing ] Procedures.