Fuse Holder

Fuse Holder

Special tools, testers and auxiliary items required

• Torque Wrench (V.A.G 1410)

• Trim Removal Wedge (VAS 3409)

CAUTION!
When disconnecting and connecting battery, the procedure must be followed as described in the Repair Information. Refer to=> [ Battery, Disconnecting and Connecting ] Battery, Disconnecting and Connecting.

• The Passat has two fuse panels located on the left and right side of the instrument panel.

• The following illustration depicts procedure for removing the left fuse panel. Work procedure for removing right fuse panel is the same.

Removing:

- Disconnect battery. Refer to => [ Battery, Disconnecting and Connecting ] Battery, Disconnecting and Connecting.

- Remove side cover - 1 - of instrument panel, do this by inserting (VAS 3409) or a screwdriver into recess - 2 - and pry off cover - 1 - in - direction of arrow -.





- Remove screws - arrows - and guide fuse panel - 1 - out toward inside, considering length of available cable.





Installing:

Install in reverse order of removal, noting the following:

- Tighten the screws to tightening specification. Refer to => [ Fastener Tightening Specifications, Fuse Holder ] Fastener Tightening Specifications, Fuse Holder.