Ignition Switch: Service and Repair

Electronic Ignition Switch (D9)

Special tools, testers and auxiliary items required

• Pliers (VAS 6339)

• Coding, basic setting or adaptation is not necessary if Electronic Ignition Switch is replaced.

Removing:

- Switch ignition and all electrical consumers off and disengage the key or ignition switch in position 0 (ignition off).

- Remove steering wheel.

- Remove driver's side panel.

- Push cover - 3 - down with panel - 1 - to gain access to catches of panel - 1 -.





- Press catches of panel - 1 - outward using (VAS 6339) through the recesses - 2 - on both sides.





- Remove trim.

- Remove the bolt - 1 -.





- Release catches - arrow - on both sides and remove Electronic Ignition Switch - 2 - in - direction of arrow - from driver's side panel - 1 -.





Installing:

Install in reverse order of removal.

• When installing, make sure electronic ignition switch locks securely in driver's side panel.