Instrument Panel Fuse Panel

Instrument Panel Fuse Panel

Special tools, testers and auxiliary items required

• Torque Wrench (V.A.G 1410)

• Trim Removal Wedge (VAS 3409)


Follow the procedure in the Repair Information when disconnecting and connecting the battery. Refer to => [ Battery, Disconnecting and Connecting ] Battery, Disconnecting and Connecting.

Removal

- Disconnect the battery. Refer to => [ Battery, Disconnecting and Connecting ] Battery, Disconnecting and Connecting.

- Remove side cover - 1 - of instrument panel, do this by inserting (VAS 3409) or a screwdriver into recess - 2 - and pry off cover - 1 - in - direction of arrow -.






- Remove the bolts - arrows - and the fuse panel - 1 -. Be careful of the connected wires.






Installation

Install in reverse order of removal, noting the following:

- Tighten the bolts to 4 Nm.