Battery Overview

Battery Overview

• By removing the battery negative terminal clamp (current disruption), safe work on the electrical system is guaranteed. Disconnecting the battery positive ( B+) terminal must only be performed as required to remove battery from vehicle, and must only be carried out after the negative ( - ) terminal is disconnected. However, observe notes for connecting battery in any case.






1 Battery Terminal Clamp Ground Wire

• Read and follow the information about the battery terminal threaded connection. Refer to => [ Battery Post/Terminal ] Battery Post/Terminal.

2 Mounting Nut, Battery Terminal Clamp Ground Wire

• 6 Nm

• M6

3 Battery Terminal Clamp Positive Wire

• Read and follow the information about the battery terminal threaded connection. Refer to => [ Battery Post/Terminal ] Battery Post/Terminal.

4 Mounting Nut, Battery Terminal Clamp, Positive Wire

• 6 Nm

• M6

5 Battery

• Removing and installing, refer to => [ Battery ] Battery.

6 Clamping Plate

7 Mounting Bolt, Clamping Plate

• 35 Nm

• M8 x 35