Driver-Side Side Airbag Crash Sensor

Driver-Side Side Airbag Crash Sensor

• The driver thorax airbag crash sensor (G179) is installed on the front door subframe.

Removing

The general safety precautions for working on airbag, belt tensioner and battery cut-out units (pyrotechnic components) must be observed. Refer to => [ Pyrotechnic Components Safety Precautions ] Service Precautions.

Perform the following:

- Disconnect the battery.

- Remove the front door trim panel. Refer to => [ Front Door Trim Panel Assembly Overview ] Front Door Trim Panel Assembly Overview.

- Disconnect the wiring harness - 3 - from the driver side airbag crash sensor (G179) - 2 -.

- Push the catch - arrow - upward with a screwdriver. Remove the bracket - 1 - and crash sensor - 2 - from the subframe.






Installation

- Install in reverse order of removal.

- Turn on the ignition.

Make sure no one is in the vehicle.

- Connect the battery.