Ash Tray: Service and Repair

Ashtray Replacement

Removal Procedure





Caution: Refer to Battery Disconnect Caution Battery Disconnect Caution.

1. Disconnect the negative battery cable.
2. Remove the console cover.
3. Remove the screws and the ashtray trim panel.
4. Disconnect the electrical connector.
5. Remove the cigar lighter. Refer to Cigar Lighter Housing Replacement - Instrument Panel (I/P) Service and Repair.
6. Remove the ashtray lamp. Refer to Ashtray Lamp Bulb Replacement Service and Repair.

Installation Procedure




1. Install the ashtray lamp. Refer to Ashtray Lamp Bulb Replacement Service and Repair.
2. Install the cigar lighter. Refer to Cigar Lighter Housing Replacement - Instrument Panel (I/P) Service and Repair.
3. Connect the electrical connector.

Notice: Refer to Fastener Notice Fastener Notice.

4. Install the screws and the ashtray trim panel.

Tighten the ashtray housing screws to 2.5 Nm (22 lb in).

5. Install the console cover.
6. Connect the negative battery cable.